Wide stereo sample

This one is from dr. vinnie gumbotz:

how to make the stereo image of a sample VERY wide.

say you have a strings sample thats 2 bars long and really phat, but it sounds dull.

go to the trim screen and copy the sound to a new sample.

now cut a tiny tiny bit off of the new sound.

now assign both of the string samples to pads that are side by side.

now go into the params screen and make it so both the samples play together.

now go to mixer and pan both samples all the way in opposite directions.

now when you press one pad both string samples will play, they are the same exact sample but since you cut the one just a little more they will be offset by just a little and that combined with the paning makes it sound really phat.